These 3-wire Oil & Fuel pressure sensors would be the most popular sensor that we sell by themselves for people wanting pressure sensors to run into their aftermarket ECU’s. They are rated from 0 – 145 PSI and come with a 1/8 NPT thread and 2.5M wiring loom with plug for the sensor. With a lot of the newer ECU’s allowing things like fuel pressure and oil pressure inputs, more people are connecting them to their ECU’s for engine protection and also logging etc.
Our Oil, Fuel pressure sensors are all high quality 3-wires sensors, 3-wire wire pressure sensors offer greater accuracy over two wire pressure sensors due to inherent design characteristics. Three wire sensors are also linear and more repeatable making them the choice for high accuracy measurement. You have one wire for 5v power, another for ground and the other is the sensor signal wire.
We have one car that has been running these sensors for over a year now without missing a beat, they were also tested against much more expensive sensors at the time of installation and found the variance between them was less than 1%, which is well within acceptable variance in our opinion. These are a great high quality 3-wire oil fuel pressure sensor without a very high price tag.
*** Attention ***
These sensors are not compatible with Ethanol, be it e85 or e10 on fuel, or even any vehicle running Ethanol and being used as an oil pressure sensor, these are not the sensors to use if your vehicle is running Ethanol fuel. Even if being used as an oil pressure sensor, the issue is fuel ends up in the sump and in the oil, and that Ethanol will cause premature failure of the sensors. If your vehicle runs any form of Ethanol fuel, you need to run our e85 pressure sensors for both fuel & oil pressure.
| Included Sensors | |
|---|---|
| Fuel & Oil Pressure Sensor | 0 – 145psi (1/8 NPT Thread) |
| Cable Lengths | |
| Fuel & Oil Pressure sensor cables | 2.5M |
